Varnish LV-725
Purpose:
For the preparation of enamel VL-725 aluminum and as an independent coating for the protection of corrosion-resistant aluminum alloys. TU 6-10-866-85
Specifications
Appearance of the film |
Colorless smooth surface without whitish floor ° C, bubbles and mechanical inclusions |
The conventional viscosity according to the viscosimeter VZ-246 with a nozzle diameter of 4 mm at a temperature (20.0 ± 0.5) ° C, s |
10 –16 |
Mass fraction of nonvolatile substances,% |
5,0–8,0 |
Drying time to degree 1 at a temperature of (20 ± 2) ° C, h, not more than |
1 |
Drying time to grade 3 at temperature (115 ± 120) ° C, h, not more than |
4 |
The hardness of the film by the pendulum device M-3
, standard units, no less than
TML (pendulum A), rel. unit, not less than |
0,6
0,3 |
Application:
Apply by spraying, brushing, dipping. If necessary, dilute with solvent P-6. Consumption for single-layer coating — 155-256 g / m2
Storage:
The warranty period of storage is 6 months from the date of manufacture.
Packing:
Categories
VL-725, lacquer, For the preparation of enamel VL-725, components, aluminum
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !!
Moscow
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
dann-25@bk.ru
Saint Petersburg
8 (812) 318-12-75
8 (812) 318-12-74