FeedLine NSF H1
Grease based on highly refined white oil, thickened with a complex aluminum soap. Contains a composition of additives and white lubricant additives that meet the special requirements of the food industry. Has the approval of NSF H1.
Operating temperature -20 ° C to + 150 ° C
Operational properties
The very high adhesion properties of FeedLine due to the characteristics of the thickener give rise to unmatched extrusion resistance, effectively protecting the working parts of the equipment against wear and corrosion. The good high-temperature properties of the FoeedLine lubricant make it possible to effectively use it in the temperature range from -20 ° C to + 150 ° C. Excellent water-repellent properties and moisture resistance of the lubricant make it possible to operate it in cases of accidental watering, as well as under conditions of dynamic water impact. Has a tolerance for use in conditions where contact with NSF H1 food products is possible.
Application
FeedLine lubricant is intended for lubrication of friction units of mechanical equipment operated in the food and pharmaceutical industry under low and medium mechanical loads, as well as at high temperatures and high humidity. FeedLine is specially designed and recommended for use in food processing equipment where accidental contact of lubricant with the product is possible.
Environment
ARGO products under normal conditions of use and observance of personal hygiene rules do not pose a health hazard. The product is not flammable and non-toxic. Maximum preservation of performance is achieved when stored in a cool place in a tightly closed container. Avoid contamination of the environment, do not dispose of the product in sewerage or sewage. For disposal of used lubricants, consult certified organizations in the field. For more information, please contact the ARGO representative.
Property
Index
|
Method
|
FeedLine
|
Thickener |
—
|
Al-Complex
|
Base oil |
—
|
White mineral
|
Operating temperature range, ºС |
DIN 51825 |
-20…+150
|
Lubricant color |
Visually |
White |
Consistency class NLGI |
DIN 51 818 |
2
|
Penetration 0.1 mm |
DIN ISO 2137 |
265-295
|
Base oil viscosity at 40 ° C, mm2 / s |
DIN 51562-1 |
112
|
Droplet temperature, ºС |
DIN ISO 2176 |
232
|
Welding load, N |
DIN 51350 |
2450
|
Load tests Timken Ok Load, lbs |
ASTM D2509 |
40
|
Resistance to washing with water at 80 ° C,% |
ASTM D1264 |
3,5
|
Resistance to elution by a water jet,% |
ASTM D4049 |
25,6
|
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !
Moscow
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
dann-25@bk.ru
Saint Petersburg
8 (812) 318-12-75
8 (812) 318-12-74