Hydraulic oils AMG-10
AMG-10 is made from deep-de-aromatized low cold-test fraction base, recovered from paraffinaceous oils blend hydrocracking products, and is composed of naphthene and isoparaffin hydrocarbons. It contains an oil thickener, an antioxidant additive and a special distinctive organic pigment.
Characteristics:
| Index name
|
AMG-10 |
| Compliance with classifi cations ISO VG ISO 6743 // DIN 51524 |
15 HL // HLP |
| Designation according to GOST 17479.3
|
МГ-15-Б
|
| Kinematic viscosity, mm2 /s:
|
|
| — at 40°С, not less than
|
— |
| — at 50°С, not less than
|
10 |
| — at minus 40°С, not more than
|
— |
| — at minus 50°С, not more than
|
1250 |
| Viscosity index, not less than
|
140 |
| Temperature, °С:
|
|
| — Open cup fl ash point, °С, not less than
|
93 |
| — Pour point, not more than
|
-70 |
| Mass fraction, %, not more than:
|
|
| — mechanical impurities
|
0,003 |
| — water
|
None |
| Mass fraction of zinc, %, not less than
|
0,01 |
| Ash content, %, not more than
|
— |
| Acid number, mg КОН/g, within
|
Not more than 0,03 |
Perfomance level:
ISO VG: 15
ISO 6743: HL
DIN 51524: HLP
Application area:
AMG-10 oil is designed for use as a working fluid for hydraulic devices operating in the range of environmental temperatures from minus 60°С to +55 °С.
Advantages
- Fully synthetic fluid, contents special additives that allows to improve antioxygenic properties in comparison with mineral hydraulic oil AMG-10
- Has wide temperature range: till +175 °C long-time and till +200°C short-time. (For comparison, mineral oil AMG-10 has: till +125 °C long-time and till +150°C short-time)
- Because of special additives the fluid has increased lubricating properties at the temperature up to 150 °С. This advantage improver working conditions of hydraulic units and increases lifetime of hydraulic systems.
- Has increased flash point that improves fire resistant measures.
Benefits
- Minimum viscosity change over wide range of operating temperatures
- Low pour point allows to operate at extremely low temperatures
- High mechanical stability
- Extended oil life
- Ultrafine filtration
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !!
Moscow
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
dann-25@bk.ru
Saint Petersburg
8 (812) 318-12-75
8 (812) 318-12-74