Company "Condor"
Complex supplies for industrial companies
Menu
Complex supplies for industrial companies

КО-811

The purpose of enamel-kO-811 is a protective anticorrosion coating for steel, titanium and aluminum surfaces that are exposed to temperatures up to 400 ° C during operation. Resistant to moisture, oil and gasoline.

Composition of heat-resistant enamel КО-811

Enamel KO-811 is a suspension of pigments in a solution of silicone lacquer.

These enamels form a uniform coating without any inclusions.

Characteristics of enamel KO-811

The nominal viscosity of the enamel is 12-20 s according to the viscosimeter type ВЗ-246 or ВЗ-4 with a nozzle diameter of 4 mm, at a temperature of 20 ± 0.5 ° C.
The mass fraction of non-volatile substances of red enamel is 30-35%, green and black 39-45%.
Drying time at a temperature of 200 ± 2 ° C is not more than two hours.
The elasticity of the enamel film KO-811 under bending is no more than 3 mm.
The hardness of the film is not less than 0.5 cu. on the device type M-3.
The thermal stability of the coating is not less than 5 hours at a temperature of 440 ± 10 ° C.
The film is resistant to static action of water at 20 ± 0.5 ° C for at least 24 hours.
Resistance of enamel coating KO-811 to gasoline at a temperature of 20 ± 2 ° C for at least two hours.

 

 OOO KONDOR COMPANY

ATT.: SUPPLY DEPARTMENT !!!! R&LD !!

Moscow

8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
dann-25@bk.ru

Saint Petersburg

8 (812) 318-12-75
8 (812) 318-12-74