TermoMax HD
High-quality, multi-purpose, highly resistant grease based on viscous mineral oil and a complex lithium thickener for ultra-high mechanical loads and high temperatures. TermoMax HD contains a complex of effective additives that enhance performance. To increase the load-bearing capacity, molybdenum disulphide was introduced into the composition.
Operating temperature -20 ° C … + 180 ° C
Operational properties
TermoMax HD grease is effective in the temperature range from -20 ° C to + 180 ° C. Short-term withstands heating up to 220 ° C. This product has a high mechanical stability, is resistant to water, provides a reliable protection of the mechanisms against corrosion throughout the entire period of operation. TermoMax HD has an increased service life compared to conventional lithium greases, which significantly increases the service interval.
Application
TermoMax HD grease is used to ensure trouble-free operation of large-dimension, high-loaded, low-speed rolling bearings in metallurgical, refractory, cement and mining equipment. It is especially important to use in bearings operating at high temperatures. TermoMax HD1 can be used in centralized lubrication systems for industrial equipment.
Environment
ARGO products under normal conditions of use and observance of personal hygiene rules do not pose a health hazard. The product is not flammable and non-toxic. Maximum preservation of performance is achieved when stored in a cool place in a tightly closed container. Avoid contamination of the environment, do not dispose of the product in sewerage or sewage. For disposal of used lubricants, consult certified organizations in the field.
| Characteristic |
Method |
EP00
|
EP0
|
EP1
|
EP2
|
ЕР3
|
| Thickener |
—
|
Li-complex
|
| MoS2, % |
—
|
5
|
| Operating temperature range, ºС |
—
|
-20..+180
|
-20..+180
|
-20..+180
|
-20..+180
|
-20..+180
|
| Classification of lubricants |
DIN 51502 |
OGPF00R-20
|
KPF0R-20
|
KPF1R-20
|
KPF2R-20
|
KPF3R-20
|
Lubricant color |
Visually |
Dark grey |
| Consistency class according to NLGI |
DIN 51 818 |
00
|
0
|
1
|
2
|
3
|
| Penetration 0.1 mm |
DIN ISO 2137 |
400-430
|
355-385
|
310-340
|
265-295
|
235-250
|
| Base oil viscosity at 40 ° C, mm2 / s |
DIN 51562-1 |
460
|
460
|
460
|
460
|
460
|
| Droplet temperature, ºС |
DIN ISO 2176 |
—
|
—
|
≥260
|
≥260
|
≥260
|
| Welding load, N |
DIN 51350 |
6174
|
6174
|
6174
|
6174
|
6174
|
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !
Moscow
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
dann-25@bk.ru
Saint Petersburg
8 (812) 318-12-75
8 (812) 318-12-74