PVC tubes for pneumatic devices ST-18
Purpose:
- For the in-house installation of pneumatic devices operating in the temperature range from -40 to + 60 ° C;
- For use in domestic and technical purposes for the transport of non-aggressive low viscosity liquids in the temperature range from -40 to +60 ° C;
- The use of tubes in a static state at a temperature of -50 ° C is allowed.
PVC TUBES
- are elastic;
- are strong;
- repeatedly used for installation;
- do not cause corrosion of non-ferrous metals based on copper and aluminum, as well as steel with protective coatings;
- successfully replace rubber and polyethylene pipes;
- have a smooth surface, without pores and cracks, with a bluish or greenish tinge, which allows to reduce the laboriousness of assembly work, increase the service life and improve the aesthetic appearance of the devices.
Technical characteristics of plastic:
Breaking stress at tension, kgf / cm, not less than |
100 |
Relative elongation at break,%, not less than |
300 |
Temperature of brittleness, deg. C, not higher |
-40 |
Breaking strength, MPa, not less than |
15 |
DIMENSIONS OF TUBES
Inside diameter, mm |
Wall thickness,
mm |
3,0+0,5 |
1,3+0,10 |
4,0+0,5 |
1,5+0,10 |
6,0+0,5 |
1,5+0,25 |
7,0+0,5 |
1,5+0,25 |
8,0+0,5 |
2,0+0,25 |
10,0+0,5 |
2,0+0,25 |
15,0+1,0 |
3,0+0,50 |
16,0+0,5 |
3,0+0,25 |
20,0+0,5 |
3,0+0,25 |
25,0+1,0 |
4,0+0,50 |
30,0+2,0 |
5,0+1,00 |
PRODUCTS CERTIFIED
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !
Moscow
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
dann-25@bk.ru
Saint Petersburg
8 (812) 318-12-75
8 (812) 318-12-74