Composition acrylic self-curing marks AST-T
The COMPOSITION is intended for use:
- as a structural material for the manufacture of molding models,
- as a restoration material;
- as a binder for various inorganic fillers (marble and granite chips, kaolin sand, cement, etc.).
The COMPOSITION consists of two components A and B and is prepared by mixing these components in the ratios given below.
|transparent light-liquid liquid of light-yellow or light-violet color
|Mass fraction of residual benzoyl peroxide,%
|Mass fraction of water,%, not more than
|The time for complete curing of the composition at a temperature (23 +/- 2) degrees C, h, not more than
The physical and mechanical properties of the cured composition
|Water absorption in cold water,%, not more than
|Maximum bending stress, MPa, not less than
|Hardness when ball is pressed in, MPa, not less than
|Softening temperature, degrees C, no less than
|Stress under compression under relative deformation is not more than 25%, MPa, not less than
Guaranteed shelf life: component A — 2 years, component B — 2 months.
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
8 (812) 318-12-75
8 (812) 318-12-74