Enamel KO-198 is a one-packing material. Enamel KO-198 is used for corrosion protection of metal surfaces, which are operated under the influence of acids (sulfuric, nitric, hydrochloric), sea water, ground and mineralized waters, open atmosphere. Enamel KO-198 can be used for painting foundations. The coating based on enamel KO-198 is resistant to ultraviolet rays, moisture resistance, frost resistance and heat resistance from -60 ° to + 300 °.
Color — different at the request of the customer;
The appearance of the film is uniform, without foreign inclusions;
Drying time to art. 3 at a temperature (20 ± 2) ° C — not more than 20 minutes;
Conventional viscosity according to viscometer type ВЗ-4 at temperature (20 ± 0,5) ° C — 12-20 s;
Mass fraction of non-volatile substances — not less than 30%;
The theoretical consumption for single-layer application is 180-250 g / m²;
Adhesion of the film — no more than 2 points;
The strength of the film upon impact on a device of the V-1 type is not less than 50 cm;
Temperature resistance of the film at a temperature (300 ± 5) ° C — not less than 5 hours;
The hardness of the film by the pendulum device TML — not less than 0.45 conv. units
Surface before application degrease, clean from dirt and dust, rust and scale, the remains of the old paint to the degree of St3 or Sa2. Enamel KO-198 thoroughly mix before homogenous mass, if necessary dilute with xylene or toluene to working viscosity. KO-198 enamel is applied at a temperature from minus 30 ° C to plus 40 ° C by pneumatic or airless spraying in two cross-sections. When applying enamel KO-198 at low temperatures, the temperature of the surface to be painted should be 3 ° C above the dew point, if necessary, blow out with warm air. The coating acquires its physico-chemical properties on the 7th day.
The shelf life in unopened original packaging is 12 months from the date of manufacture.
Flammable! Keep away from fire! When applying, use personal protective equipment.
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !!
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
8 (812) 318-12-75
8 (812) 318-12-74