For varnishing of metal surfaces exposed to high temperatures.
|Appearance of the film
||smooth transparent glossy surface
|The conventional viscosity by the VZ-246 viscometer with a nozzle diameter of 4 mm at a temperature (20.0 + 0.5) 0С, from 20-25
|Mass fraction of nonvolatile substances,%
|Drying time to grade 3 at temperature (160 + 2) 0С, min, not more than
|Film resistance to humid atmosphere, h, not less than
|The thermal stability of the film at a temperature (200 + 2) 0С, h, at least
Lacquer is used with a drier. Mixing the varnish with desiccant is made immediately before use at the rate of 100 parts by mass of lacquer for 2 parts by weight of the LCD-I desiccant or LCD-II desiccant.
The varnish is applied to the surface by spraying. If necessary, dilute with toluene or xylene. The consumption for a single-layer coating is 75-95 g / m2.
Shelf life — 6 months
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !!
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
8 (812) 318-12-75
8 (812) 318-12-74