Created for :
- production of adhesive tape on a polymer base (polyethylene, polypropylene, lavsan, polyvinyl chloride);
- gluing of labeling labels to polyethylene, glass and other types of containers for food and non-food products (in the absence of direct contact with food);
- production of self-adhesive wallpaper.
ADVANTAGES OF USING LATACRIL-BM:
good adhesion to all surfaces (including polyethylene, fluoroplastic, etc.);
long-term stickiness, which allows you to repeatedly duplicate the materials to be glued.
It is possible to adjust the viscosity in agreement with the consumer. FSUE «Research Institute of Polymers» produces 3 brands of glue: low viscosity, medium viscosity, high viscosity.
Technical characteristics of glue
||Standard for the brand
Homogeneous mass of white or yellowish color
|Conventional viscosity, s
|Apparent viscosity according to Brookfield, Pa * s
|Mass fraction of dry residue,%, not less than
|Type of destruction of the adhesive seam when duplicating a polyethylene film with paper
||Cohesive destruction on paper
Supplied in plastic drums and cans.
Storage conditions. Do not allow heating above +40 ° C, the recommended temperature range from +5 ° C to +30 ° C. In closed containers, protected from frost and heat, the adhesive can retain properties for 12 months.
Glue is not dangerous to health, it is not flammable.
The product is certified.
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
8 (812) 318-12-75
8 (812) 318-12-74