Company "Condor"
Complex supplies for industrial companies
Menu
Complex supplies for industrial companies
Catalogue:

PVC tubes for pneumatic devices ST-18

Purpose:

  • For the in-house installation of pneumatic devices operating in the temperature range from -40 to + 60 ° C;
  • For use in domestic and technical purposes for the transport of non-aggressive low viscosity liquids in the temperature range from -40 to +60 ° C;
  • The use of tubes in a static state at a temperature of -50 ° C is allowed.

PVC TUBES

  • are elastic;
  • are strong;
  • repeatedly used for installation;
  • do not cause corrosion of non-ferrous metals based on copper and aluminum, as well as steel with protective coatings;
  • successfully replace rubber and polyethylene pipes;
  • have a smooth surface, without pores and cracks, with a bluish or greenish tinge, which allows to reduce the laboriousness of assembly work, increase the service life and improve the aesthetic appearance of the devices.

Technical characteristics of plastic:

Breaking stress at tension, kgf / cm, not less than 100
Relative elongation at break,%, not less than 300
Temperature of brittleness, deg. C, not higher -40
Breaking strength, MPa, not less than 15

DIMENSIONS OF TUBES

Inside diameter, mm Wall thickness,
mm
3,0+0,5 1,3+0,10
4,0+0,5 1,5+0,10
6,0+0,5 1,5+0,25
7,0+0,5 1,5+0,25
8,0+0,5 2,0+0,25
10,0+0,5 2,0+0,25
15,0+1,0 3,0+0,50
16,0+0,5 3,0+0,25
20,0+0,5 3,0+0,25
25,0+1,0 4,0+0,50
30,0+2,0 5,0+1,00

 

PRODUCTS CERTIFIED

 

 OOO KONDOR COMPANY

ATT.: SUPPLY DEPARTMENT !!!! R&LD !

Moscow

8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
dann-25@bk.ru

Saint Petersburg

8 (812) 318-12-75
8 (812) 318-12-74