Top quality plastic grease based on polyalphaolefin (PAO) synthetic low viscosity base oil and complex lithium thickener. TermoSint 50 includes a highly effective multifunctional additive package that improves performance. The formulation of lubrication uses innovative technology SM-ART, which creates an effect of smoothing out minor defects in the working surfaces and soft running-in of the friction units.
Operating temperature -50ºC … + 160ºС
TermoSint 50 grease is operable in a wide temperature range from -50 to 160 ° C, for a short time up to 180 ° C. High antioxidant properties and low volatility of PAO base oil provide a long service life in closed systems at elevated temperatures. Lubricant has good low-temperature properties, good pumpability, creates minimum starting and working loads, promotes energy saving. Excellent parameters of mechanical stability allow the lubrication of TermoSint 50 to maintain its performance and consistency throughout the entire service life. TermoSint 50 grease has good adhesion to metals, well protects lubricated surfaces from corrosion, retain their functional properties when working in contact with water.
TermoSint 50 is designed for use in a wide range of loads, speeds and temperatures, as well as in contact with water. Lubricant is recommended for use when long service life is required at elevated temperatures, high humidity, and good low temperature properties. The most typical example of the application of TermoSint 50 is the lubrication of bearings of high-speed electric motors, wind power stations and fans.
ARGO products under normal conditions of use and observance of personal hygiene rules do not pose a health hazard. The product is not flammable and non-toxic. Maximum preservation of performance is achieved when stored in a cool place in a tightly closed container. Avoid contamination of the environment, do not dispose of the product in sewerage or sewage.
|Operating temperature range, ºС
|Classification of lubricants
|Consistency class NLGI
||DIN 51 818
|Penetration 0.1 mm
||DIN ISO 2137
|Base oil viscosity at 40 ° C, mm2 / s
|Droplet temperature, ºС
||DIN ISO 2176
|Welding load, kg
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
8 (812) 318-12-75
8 (812) 318-12-74