Water-soluble process grease SINERRS® CSG
The product of the brand «Syners®-SVG», a technological lubricant, is a homogeneous translucent liquid from light yellow to dark brown color, intended for cold working of metals by pressure: stamping, calibration, drawing, cutting, rolling, drawing.
The temperature range of application of the lubricant is from +10 to + 150 ° C, the solidification temperature is +5 ° C. The kinematic viscosity of the lubricant at 25 ° C is 1600-5000 cSt (mm square / s), the density is 1.20 — 1.22 g / cm2. (20 degrees C).
The product is not volatile and non-toxic. There is a sanitary-epidemiological conclusion.
The product is used for cold deformation of aluminum and its alloys, magnesium alloys, copper, brass, nickel, titanium and its alloys, and mild steel. Lubrication in any ratio is mixed with water and can be used as a concentrate for the preparation of coolant, with a content in the solution of 5-20%. When the products are annealed, the lubricant does not produce a coke residue.
Lubrication is applied to the surface of the workpieces in various ways, both manually and automatically, including with the help of central lubrication systems. After the end of the molding of the product, the residual grease from the surface of the metal is easily removed by washing with water, giving the metal surface ready for anticorrosive treatment, and after drying — for the application of paint and varnish coatings.
Waste grease is suitable as a base for aqueous quenching media, as a detergent-dispersing, dust-suppressing and antistatic agent. Lubricant and its aqueous solutions are biodegradable and, if properly diluted, can be discharged into the sewage system.
OOO KONDOR COMPANY
ATT.: SUPPLY DEPARTMENT !!!! R&LD !
8 (495) 790-14-52
8 (915) 218-57-47
Fax: 8 (495) 223-92-57
8 (812) 318-12-75
8 (812) 318-12-74